new product tpsmp6.8 thru tpsmp43a vishay general semiconductor document number: 88471 revision: 21-oct-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 high power density surface mount automotive transient voltage suppressors features ? very low profile - typical height of 1.0 mm ? ideal for automated placement ? uni-direction only ? exclusive patented par oxide passivated chip construction ? excellent clamping capability ? low incremental surge resistance ? very fast response time ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications protection for ics, drive transistors, signal lines of sensor units, and electronic units in consumer, computer, industrial and automotive applications. mechanical data case: do-220aa (smp) molding compound meets ul 94 v-0 flammability rating base p/nhe3 - rohs co mpliant, high reliability/ automotive grade (aec q101 qualified) terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 he3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end primary characteristics v br 6.8 v to 43 v p ppm (for v br 6.8 v) 250 w p ppm (for v br 7.5 v to 12 v) 300 w p ppm (for v br 13 v to 43 v) 400 w p d 2.5 w i fsm 40 a t j max. 185 c do-220aa (smp) esmp tm series patented* *patent #'s 4,9 8 0,315 5,166,769 5,27 8 ,094 notes: (1) non-repetitive current pulse, per fig. 3 and derated above t a = 25 c per fig. 2 (2) mounted on p.c.b. with 5.0 x 5.0 mm copper pads attached to each terminal (3) pulse test: 300 s pulse width, 1 % duty cycle maximum ratings (t a = 25 c, unless otherwise noted) parameter symbol value unit peak power dissipation with a 10/1000 s waveform (1)(2) (fig. 1 and 3) p ppm see table next page w peak power pulse current with a 10/1000 s waveform (1) (fig. 1) i ppm see table next page a power dissipation on in finite heatsink, t a = 75 c p d 2.5 w peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 40 a maximum instantaneous forward voltage at 25 a (3) v f 2.5 v operating junction and storage temperature range t j , t stg - 65 to + 185 c
new product tpsmp6.8 thru tpsmp43a vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88471 revision: 21-oct-08 2 notes: (1) v br measured after i t applied for 300 s, i t = square wave pulse or equivalent (2) surge current waveform per fig. 3 and derated per fig. 2 (3) all terms and symbols are consistent with ansi/ieee c62.35 electrical characteristics (t a = 25 c, unless otherwise noted) device type device marking code breakdow n voltage v br (1) at i t (v) test current i t (ma) stand- off voltage v wm (v) maximum reverse leakage at v wm i r (a) maximum reverse leakage at v wm t j = 150 c i d (a) maximum peak pulse surge current i ppm (2) (a) maximum clamping voltag e at i ppm v c (v) maximum temperature coefficient of v br (%/c) min. max. tpsmp6.8 adp 6.12 7.48 10.0 5.50 300 1000 23.2 10.8 0.057 tpsmp6.8a aep 6.45 7.14 10.0 5.80 300 1000 23.8 10.5 0.057 tpsmp7.5 afp 6.75 8.25 10.0 6.05 150 500 25.6 11.7 0.060 tpsmp7.5a agp 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061 tpsmp8.2 ahp 7.38 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065 tpsmp8.2a akp 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 tpsmp9.1 alp 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 0.068 tpsmp9.1a amp 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 TPSMP10 anp 9.00 11.0 1.0 8.10 5.0 20.0 20.0 15.0 0.073 TPSMP10a app 9.50 10.5 1.0 8.55 5.0 20.0 20.7 14.5 0.073 tpsmp11 aqp 9.90 12.1 1.0 8.92 2.0 10.0 18.5 16.2 0.075 tpsmp11a arp 10.5 11.6 1.0 9.40 2.0 10.0 19.2 15.6 0.075 tpsmp12 asp 10.8 13.2 1.0 9.72 1.0 5.0 17.3 17.3 0.076 tpsmp12a atp 11.4 12.6 1.0 10.2 1.0 5.0 18.0 16.7 0.078 tpsmp13 aup 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081 tpsmp13a avp 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 tpsmp15 awp 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084 tpsmp15a axp 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 tpsmp16 ayp 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086 tpsmp16a azp 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 tpsmp18 bdp 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088 tpsmp18a bep 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 tpsmp20 bfp 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090 tpsmp20a bgp 19.0 21.0 1.0 17.1 1.0 5.0 14.4 27.7 0.090 tpsmp22 bhp 19.8 24.2 1.0 17.8 1.0 5.0 12.5 31.9 0.092 tpsmp22a bkp 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 tpsmp24 blp 21.6 26.4 1.0 19.4 1.0 5.0 11.5 34.7 0.094 tpsmp24a bmp 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 tpsmp27 bnp 24.3 29.7 1.0 21.8 1.0 5.0 10.2 39.1 0.100 tpsmp27a bpp 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 tpsmp30 bqp 27.0 33.0 1.0 24.3 1.0 5.0 9.2 43.5 0.097 tpsmp30a brp 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 tpsmp33 bsp 29.7 36.3 1.0 26.8 1.0 5.0 8.4 47.7 0.098 tpsmp33a btp 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 tpsmp36 bup 32.4 39.6 1.0 29.1 1.0 5.0 7.7 52.0 0.099 tpsmp36a bvp 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 tpsmp39 bwp 35.1 42.9 1.0 31.6 1.0 5.0 7.1 56.4 0.100 tpsmp39a bxp 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 tpsmp43 byp 38.7 47.3 1.0 34.8 1.0 5.0 6.5 61.9 0.101 tpsmp43a bzp 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101
new product tpsmp6.8 thru tpsmp43a vishay general semiconductor document number: 88471 revision: 21-oct-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 note: (1) automotive grade aec q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode tpsmp6.8ahe3/84a (1) 0.024 84a 3000 7" diameter plastic tape and reel tpsmp6.8ahe3/85a (1) 0.024 85a 10000 13" diameter plastic tape and reel figure 1. peak pulse power rating curve figure 2. pulse derating curve tpsmp13 - tpsmp43a tpsmp7.5 - tpsmp12a tpsmp6. 8 0.1 s 1.0 s 10 s 100 s 1.0 ms 10 ms 10 1.0 0.1 0.01 p ppm - peak po w er (k w ) t d - p u lse w idth (s) 100 75 50 25 0 0 25 50 75 100 125 150 175 200 t j - initial temperat u re (c) peak p u lse po w er (p pp ) or c u rrent (i pp ) derating in percentage ( % ) figure 3. pulse waveform figure 4. typical junction capacitance 0 50 100 150 t r = 10 s peak v al u e i ppm half v al u e - i ppm i pp 2 t d 10/1000 s w a v eform as defined b y r.e.a. 0 1.0 2.0 3.0 4.0 t - time (ms) i ppm - peak p u lse c u rrent, % i rsm t j = 25 c p u lse w idth (t d ) is defined as the point w here the peak c u rrent decays to 50 % of i ppm 10 100 1000 10 000 1 10 100 c j - j u nction capacitance (pf) v br - breakdo w n v oltage ( v ) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p v r , meas u red at zero bias v r meas u red at stand-off v oltage, v w m
new product tpsmp6.8 thru tpsmp43a vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88471 revision: 21-oct-08 4 package outline dimensions in inches (millimeters) figure 5. maximum peak forward surge current 40 35 30 25 20 15 10 5 0 1 10 100 peak for w ard s u rge c u rrent (a) nu m b er of cycles at 50 hz figure 6. steady state power derating curve 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 175 200 t a - am b ient temperat u re (c) p m(a v ) - steady state po w er dissipation ( w ) t a = t l , on infinite heatsink fr-4 pcb, on v ishay minim u m recommended pad layo u t 0.000 (0.00) 0.012 (0.30) 0.013 (0.35) 0.004 (0.10) 0.01 8 (0.45) 0.006 (0.15) 0.045 (1.15) 0.033 (0. 8 5) 0.036 (0.91) 0.024 (0.61) 0.016 (0.40) 0.032 (0. 8 0) 0.053 (1.35) 0.041 (1.05) 0.012 (0.30) ref. 0.105 (2.67) 0.025 (0.635) 0.100 (2.54) 0.030 (0.762) 0.050 (1.27) cathode band 0.142 (3.61) 0.126 (3.19) 0.15 8 (4.00) 0.146 (3.70) 0.0 8 6 (2.1 8 ) 0.074 (1. 88 ) 0.0 8 7 (2.20) 0.103 (2.60) do-220aa (smp)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
